X

Log in

23.08.2019

Rear ladders with non drill fitment

We have manufactured rear ladders more than two years, therefore it was time for update. All rear ladders for large vans have non drill fitment. This means, if you fit the ladder to brand new van, you do not have to damage it – just clamp the ladder to the van and you are done.

For following large vans, we have ladders: Ford Transit, Volkswagen Crafter, MAN TGE, Fiat Ducato, Peugeot Boxer, Citroen Jumper, Iveco Daily and Mercedes-Benz Sprinter.

Our goal is to be one stop shop for our customers. Weather you are looking for skidplates, extralights, towbars or sidesteps – we have everything covered. All our products have been designed so, that they fit nicely together.

Back
13.08.2019

“Hydra” productfamily has been updated

We are happy to announce new Hydra-bar in our lineup. We already had it for DAF XF Euro6, Volvo FH4 and Scania R-series and nextGen. Now it is ready to be ordered for MAN TGX!

First Hydra-bars were manufactured for Scania R-series in 2010. After great success, we also launched it for Volvo FH4. Hydra-bars are very distinctive to Metec. But to understand truly great product, original product must be copied by the competitors and so has happened with Hydra bar.

Back
01.08.2019

“Offroad” stepboards for pickup´s

As pickup´s are getting more and more popular in Europe, we have turned our eyes on them. In the past we had “Tour” stepboards, but now have launched “Offroad” stepboard family also.

New steps have been made from 76mm stainless steel to give muscular look to your pickup. Surface finish is traditional Metec high gloss mirror polish. But to give great usability and longevity, we have covered the steps with extra high resistance material.

“Offroad” are available for following vehicles: Toyota Hilux, Mercedes-Benz X-klass, Ford Ranger, Nissan Navara, Mitsubishi L200, Fiat Fullback and Isuzu D-max.

Back
01.08.2019

Astmelauad “OffRoad” kastiautodele

Kastiautod koguvad järjest suuremat populaarsust nii Eestis, kui ka mujal Euroopas. Varasemalt oli meil olemas “Tour” astmelaudade perekond, kuid nüüd lisasime “Off-Road” nimelise tootesarja.

Uued astmed on tehtud 76mm roostevabast materjalist, mis on seejärel poleeritud, et tagada kõrge läikeaste. Kuid astmete kohad oleme katnud eriti vastupidava ning libisemisvastase kattega, et tagada suurepärane kasutusmugavus ning vastupidavus.

“Offroad” astmed leiad järgnevatele autodele: Toyota Hilux, Mercedes-Benz X-klass, Ford Ranger, Nissan Navara, Mitsubishi L200, Fiat Fullback ja Isuzu D-max.

Back
30.07.2019

Kanduri sisse integreeritud LED tuled

Oleme uuendanud laternakandurit, mille sees on LED tuled. Varasemalt oli saada ainult Volvo FH mudelile, kuid nüüd ka Scaniale. Kui varasemalt kasutasime Rigid Industries tulesid, siis uuel versioonil on Lucidity tuled. Sama kõrge kvaliteediga, kuid tunduvalt taskukohasema hinnaga.

Miks on hea, et tuled on toru sees? Kuna tänapäeva on kütusekulu ja ümbritseva keskkonnaga arvestamine oluline, siis arvestame ka meie sellega. Kui juht soovis varem lisavarustust paigaldada, kuid kartis suureneva kütusekulu pärast, siis integreeritud tuledega kandur kütusekulu ei tõsta.

Hoia meie uudistel silma peal, kuna kohe toome sama toote turule ka MAN TGX´le ja Mercedes-Benz Actrosele.

Back
30.07.2019

Lightbar with lights inside the tube

Happy to inform, that we have launched new lightbar with LED rack´s inside the tube. It used to be just for Volvo FH, but now it is also for Scania. For Volvo it was with Rigid Industries LED´s but now we have added Lucidity version also. This means price is much more affordable but with the same high quality.

We will launche the same product shortly for Mercedes-Benz Actros and MAN TGX.

Ask price from you Metec contact.

Back
05.06.2019

Lisatuled meie tootevalikus

Meie eesmärgiks on olla paindlik ning mugav partner edasimüüjatele ja lõppklientidele. Seega leiab meie valikust nüüd ka lisatuled. Kõiki tulesid oleme ise testinud ja valinud välja parimad – nii kvaliteedi, funktsionaalsuse kui ka välimuse poolest. Kuna LED paneeltuled on tänapäeval kõige eelistatumad, siis põhirõhk on sellistel tuledel. Kuid valikus on olemas ka ümaraid ning kandilisi tulesid. Sobivad tuled leiab nii kaubikule, kastiautole ning veoautole. Kõik tuled omavad vajalikke sertifikaate. Loomulikult on kõikide erinevate tulede kinnitamiseks valikus olemas ka spetsiaalsed kinnitused – klambrid ning ka kinnituskronsteinid.

Back
05.06.2019

Extralights for lightbars

Our goal is to be one stop shop. This means that we want to make life as easy to customers as possible. Hence possibility to buy accessories what we manufacture and also add lights. We also offer bars with prefitted lights – you just have to install the lightholder to the vehicle. Our lights have been chosen so, that all tastes have been catered for. Majority of lights are modern LED racks, but also round and rectangular ones. Keep your eye on as we will add some new units.

All neccessary accessories needed to fit the lights to our bars are also in our portfolio.

Download our leaflet.

Back
29.05.2019

Mercedes-Benz Actros – 2019

Mercedes-Benz on uuendanud enda lipulaeva, Actrost. Actros mudel sai alguse aastal 1995 ning nüüdseks on jõutud MP5 mudelini, ehk viienda põlvkonnani. Seega oleme ka enda poolt pakutavat lisavarustust uuendanud – kogu tootevalik on leitav SIIT

Back
10.05.2019

Sidesteps for vans

We have manufactured sidesteps and sidebars over 20 years. We sell our products to most of European markets and to very different customers. Taking into account our customers opinion, we are happy to announce the launch of new product – sidebars with steps. Therefor combining the design, protection and functionality. Classical sidebars give both good looks but even more importantly protection against collisions. And the steps give customers the ease of use – large vans have high ground clearance but the original step is usually too high. With our steps, the ground clearance will not be affected although the step is lower to the ground.

Product is available for Mercedes-Benz Sprinter, Volkswagen Crafter, MAN TGE, Ford Transit and Iveco Daily. Depending of the length of the wheelbase, you can choose the needed length of the sidebar.

Back
24.04.2019

Lumesahk kastiautole

Kuigi kevad on alles saabunud Eestisse, siis rege rauta suvel. Oleme juba mitmeid aastaid lumesahku tootnud ja nüüdseks välja arendanud kerge, lihtsasti käsitletava ning vastupidava versiooni. Sahk ise on universaalne, kuid igale kastiautole on välja töötatud spetsiaalne kinnitusadapter. Seega kõikidele täna tootmises olevatele ning Eestis müüdavatele Euroopa ja Aasia kastiautodele on kinnituslahendus olemas.
Mercedes-Benz X klass, Nissan Navara ja Renault Alaskan.
Toyota Hilux.
Volkswagen Amarok.
Mitsubishi L200 ja Fiat Fullback.
Isuzu D-max.
Detailset infot saha kohta loe siit.

Back
09.04.2019

Bullbars for trucks

We have been manufacturing truck bullbars over 20 years. Compared to our competitors, our products are always made from stainless steel. As stainless steel is much more rigid compared to aluminium, our products are as light as or even lighter compared to aluminium ones.

While developing the bullbars, we turn great attention to vehicle useability. This means, that we leave the towingeye useable even with the bullbar fitted to the vehicle. We also have thought about to our customers when there is an accident. Most of our bullbars have been constructed so, that you can change parts of the bullbar.

As painting is more and more popular, you can give us RAL code and we will deliver bullbar in this specific colour.

Back
28.03.2019

Klamberkinnitusega redelid suurtele kaubikutele

Viimasel paaril aasta oleme valmistanud redeleid väikestele kaubikutele ja bussidele. Nüüd on valikus redelid ka suurtele kaubikutele ja bussidele, et tagada maksimaalselt suur kasutusvõimalus. Kuna puurimisega lahendus ei ole tänapäevane lahendus (liisingfirmad ei soovi, et autodesse kinnitusavasid puuritakse), siis kõik uued redelid on klamberkinnitusega. Paigaldus on lihtne ning kiire. Nii redel, kui ka kinnitusdetailid on valmistatud roostevabast terasest, et tagada pikaajaline vastupidavus.

Et kaubik kestaks pikalt ning tekiks võimalikult väha kasutusjälgi, siis vaata ka meie stangeplekke. Kinnitus samuti puurimisvaba ning lihtne ja kiire.

Hoia meie tegemistel silma peal, sest varsti toome turule ka kaubikute katustele mõeldud pakiraami.

Back
22.03.2019

Transportmesse Herning 2019

We take part of different shows in different European countries. First one this year was held in Denmark, in Herning, 21-23 March. This is the largest Scandinavian transportation show. Our products could be found on different vehicles, both vans and trucks. Next show where Metec is represented will be held in Latvia, Riga 12-14 April, http://www.bt1.lv/auto/eng/.

Back
15.03.2019

Peugeot, Citroen ja Opel väikekaubikute lisavarustus nüüd saadaval

Peugeot, Citroen ning Opel on turule toonud uued väikekaubikud. Et autode kasutusmugavus ja ka välismus veel täiuslikum oleks, oleme lisanud enda tootevalikusse kõik traditsioonilised lisavarustuse tooted – esitõke, euroraud, laternakandur, küljetorud, stangeplekk ning põhjakaitsed.

Back
28.02.2019

Rattakilbid ning tagarummu katted veokitele ja bussidele

Oleme juba üle kahekümne aasta valmistanud erinevaid rattakilpe veokitele ja bussidele. Selle ajaga oleme tootnud üle ühe miljoni kilbi. Meie toodangut leiab mitmelt tuntud autotootja sõidukilt. Lisaks OE klientidele toodame ka vabaturu jaoks. Meie tootevalikust leiab sobiva toote nii esi- kui ka tagateljele. Esiteljele on olemas nii valu-, kui ka terasveljele, kinniseid ning avatuid. Tagateljele pakume perforeeritud ning mitteperforeerituid ja erinevate kõrgustega. Täieliku tootevaliku leiab meie kilpide alajaotusest. Lisainfo erinevatest disainidest leiad ka SIIT.

Back
14.02.2019

Wheelcovers for trucks and buses

We have been manufacturing wheelcovers for over 20 years, over 1 million units. Our units are fitted to different truck and bus manufacturers but we also manufacture non OE units. From our lineup you can find front wheel covers but also rear axle caps, both open and closed, perforated and non perforated, in different heights and also with opening for TPS (tyre pressure system).
We also offer possibility to stamp your own logo on the covers.

ADDITIONAL INFO

Back
31.01.2019

Scania S seeriale sahaautole laternakandur

Et Scania uue R seeria valik oleks täielik, siis nüüd on saada ka sahaautole sobivaim kandur. Saada on nii vilkuritega versioon, kui ka ilma. Lisana pakume nii kaugtulesid kui ka kombineeritud tuld, et tagada hea nähtavus ka kõige lumistemates tingimustes.

Back
31.01.2019

METEC eurorauad

Oma euroraudasid välja töötades pöörame alati rõhku mitmele aspektile, kuid kõige olulisemad on ohutus, puurimisvaba paigaldus ning mudelipõhine disain.

Ohutuse saame jagada passiivseks ja aktiivseks. Et oleks passiivne ohutus tagatud, järgime Euroopa Liidu poolt kehtestatud nõudeid, ehk meie eurorauad on alati sertifitseeritud.

Aktiivse ohutuse tagab see, et euroraudadele saab lisada lisalaternaid. Toote kinnitatatakse alati sõiduki metallosade külge, tagades sellega vibratsioonivaba valgusvihu.

Kõik tooted on disainitud konkreetsele sõidukile. Me ei kasuta ühte universaalset esirauda, millele teeme sobivad kronsteinid, et sobiks mitmele sõidukile. Selline lähenemine võimaldab meil samuti tagada selle, et klient ei pea enda autot puurima vaid toode paigaldatakse juba autotootja poolt väljapakutud kinnituskohtadesse.

Vali välja endale sobiv euroraud ja küsi pakkumist.

Back
Added to cart